|
Humax Software |
|---|
| Josje download site |
| Humax Dream Settings |
| PMC
LIST UPDATE 31-10-2002 NEW Pmc list update for use with +CAM_ToH20(NL) not for older +CAM software !!! |
| HUMAX
MACRO EDITOR NEW With this tool you can define and install your own macros. TuxOnHumax HRC Patch must be installed into your decoder. |
| HUMAX
SETTINGS VIEWER BY TUX ON HUMAX V2.0 NEW The Humax Settings Viewer use the HRC patch to read the channel settings from the Humax during the normal usage. With this tool you can control your Humax and can change Settings online. |
| HUMAX
REMOTE CONTROL V2.5 BY TUX ON HUMAX NEW HRC was created to replace original RS-101P Humax Remote Control. With this tool you can send IR commands thru a null-modem cable. - Added "Auto Connect on Startup" option. - Improved connection retry procedure. |
| HUMAX
ICON PATCHER V1.3 BY TUX ON HUMAX NEW With this tool you can change the icon's in your Humax firmware. |
| HIC-10500PH
+CAM ToH 2.0 NEW Autoswitching +CAM Patch, based on Firmware 1.05.00 for the 5400, without Loader (for all Versions). ECM pids change can be done directly through enhanced EPG menu. |
| HIC-10500PH
+CAM ToH 2.0 NL NEW Same as HIC-10500PH +CAM ToH 2.0 but with Dutch menu option. This firmware is 100% official and gives 100% 'OK' within Humax uploader software !!! |
| HUMAX
UPLOADER NEW With this tool you can check hdf contents and avoid fakes. When you open an unknown hdf file you can see its content. |
| HIC10306PH
+CAM2002D2 NL Auto switching +CAM Patch by Planet Hemp with Dutch menu option. This Version is without sig-check and time-out! Previous bugs when using C.I. cams and hang-ups are solved with this new release! Features: Dolby Digital support, without Loader (for all Versions), support for all cards (C/D/F+1.2/382/3/4+Z and more). For Loader: H1.37 (0016.0400) / L1.37(0016.0000) H2.08 (0016.0600) / L2.08(0016.0200). |
| HDF
CHECK FOR +CAM2002D2 (NL) BY ALFREDO Latest HDFCHECK software to check if you have an original Planet Hemp +CAM2002D2 (NL) firmware |
| PMC
EDIT (NOT FOR USE WITH HIC-10500PH +CAM ToH 2.0
!!!) With this tool you can give the correct ECM's for the various channels. In the firmware patch is only a small version of this table included, but you can easily generate your own ECM table with this tool. |
| PMC
EDIT CORRECTION LIST (NOT FOR USE WITH
HIC-10500PH +CAM ToH 2.0 !!!) Up to date ECM pid list to download to your Humax. Two version included, 1 for use with WDN4OAK+ or Humax Control Center and 2 for use with PMC edit. Updated 3 Sep 2002 |
| HIC10500
ORIGINAL HUMAX 5400 FIRMWARE Additional function or fixed problem: Hangup on TPS Package with external CAM, Hangup on key operation of RCU, Modified the TurkSat 1C Tp info, Lipsync problem at some channels. For Loader: H1.37 (0016.0400) / L1.37(0016.0000) H2.08 (0016.0600) / L2.08(0016.0200). |
| HUMAX
5300 ALLCAM FIRMWARE NEW This patch turns the normal cam into allcam without patching it. Please read the attached readme.txt ! |
| HUMAX
5300 EUROCAM FIRMWARE NEW This patch will make your Humax 5300 with id 280600 work free with eurocam. You need to patch it with this file first to change the id, then patch it with the previous patch. |
| HUMAX
5100 EUROCAM FIRMWARE NEW This patch for Humax 5100 is to make it free with IrdetoII cam. |
| SETTINGS: |